ENHANCING QUALITY OF SERVICE: A CONCEPTUAL POKA-YOKE APPROACH
DOI:
https://doi.org/10.32890/jtom2016.11.2.5Keywords:
Quality of service, poka-yoke, mistake proofing, vending machineAbstract
Vending machine is one of the most widely used machines by the consumer. Many improvements have been made to improve the capability of vending machines. However, there are quality issues on products dispensed by the machines. In this study, the product expiration date is the main focus. Unlike buying food from the convenience stores where the expiry date for each product is readable, consumer are able to see the product expiry date only after having paid and product dispensed by the vending machine. Hence, consumer has negative perceptions of the company producing the products and also the vending machine service providers. This study emphasizes on improving the vending machines using automatic date-based switch as a poka-yoke device to improve quality of service. Qualitative approach is conducted through interview with a service provider company operating and maintaining vending machines. The result of this study revealed that the current manual maintenance have a major flaw and by adopting the poka-yoke approach on vending machines can improve the quality of service of products dispensed by the machines. Hence, The purpose of this paper is to describe issues and the improvement to quality of service on vending machine services industry by adopting a poka-yoke approach.
Metrics
References
Groocock, J. (2000). The impact of powerful and weak customers on quality assurance systems and quality improvement programs. The TQM Magazine, 12(6), 372-388.
Hughes, T. & Williams, T. (1995). Quality assurance. Oxford: Blackwell Science.
Jamaludin, R. & Young, R.I.M. (2005). The production process: A pre-emptive improvement strategy. 3rd. International Conference on Manufacturing Research (ICMR 2005). 6-8 September 2005, Cranfield University
Jamaludin, R. (2008). A product-based non-conformance classification. Proceedings of 9th.Asia Pacific Industrial Engineering & Management Systems Conference (APIEMS 2008), December 3-5, 2008, Bali.
Jamaludin, R. (2013). Defining the product-based non-conformance classification. Journal of Technology Management and Operations Management, 8(1), 1-14.
Moen, R., Nolan, T. & Provost, L. (1991). Improving quality through planned experimentation. New York: McGraw-Hill.
Nordic Council of Ministers (2007). Nordic guidelines for cost-benefit analysis in waste management. Copenhagen: Nordic Council of Ministers.
Shields, P. & Rangarjan, N. (2013). A playbook for research methods: Integrating conceptual frameworks and project management. Stillwater, OK: New Forums Press.
Shimbun, N. & Hirano, H. (1988). Poka-yoke. Cambridge, Mass: Productivity Press.
Shingo, S. (1986). Zero quality control: source inspection and the Poka-Yoke System (trans. A.P. Dillon). Portland, OR: Productivity Press.
Suhail, M., Beg, S. & Mohammad, J.A. (2014). Implementation of FSM based automatic dispense machine. National Student Conference on Advances in Electrical, Information and Communication Technology (AEICT-2014), 12- 13 April 2014, Kanpur.
Taylor, S. & Bogdan, R. (1998). Introduction to qualitative research methods. New York: Wiley.
Yalaoui, A. (2012). Optimization of logistics. London: Wiley.
Downloads
Published
How to Cite
Issue
Section
License
Disclaimer
The Journal of Technology and Operation Management (JTOM) has taken all reasonable measures to ensure that material contained in this website is the original work of the author(s). However, the Journal gives no warranty and accepts no responsibility for the accuracy or the completeness of the material; no reliance should be made by any user on the material. The user should check with the authors for confirmation. Articles published in the Journal of Technology and Operation Management (JTOM) do not represent the views held by the editors and members of the editorial board. Authors are responsible for all aspects of their articles except the editorial screen design.