ANALYSIS OF LINE EFFICIENCY IN FINISHING DEPARTMENT PT PURA NUSAPERSADA UNIT PAPER MILL 7/8
Measuring line efficiency and productivity are very important to do to find out in which level the efficiency and productivity of the business process has been carried out by the company. This paper aims to determine line efficiency analysis and provide suggestions for improvements to increase line efficiency at the finishing department of PT Pura Nusapersada. Measurement of line efficiency in the finishing department of PT Pura Nusapersada paper mill unit 7 has not yet reached the company's line efficiency value target. The initial line efficiency assessment obtained a percentage of 65.14% while the company's target was 70%. In this paper, a fishbone diagram is used to determine the root cause of the problem. Based on the research results, it was found that the most dominant cause of the problem was the inefficient work elements at the cutter, sorting, pollar, and packing work stations. Improvements were made using the eliminate, combine, re-arrange, and simplify (ECRS) method and the results of the line efficiency improvements in the finishing department increased to 71.90% and the company's target can be met.
Arman, Hakim Nasution. (2006). Manajemen Industri. Penerbit Andi. Yogykarta
Gaspersz, V. and A. Fontana. (2011). Integrated Management Problem Solving Panduan bagi Praktisi Bisnis dan Industri. USA: Vinchristo Publication.
Gaspersz, Vincent. (2004). Production Planning and Inventory Control. Cetakan Keempat. Jakarta: Gramedia.
Nabi, F., Mahmud, R., Islam, M. Md. (2015). Improving Sewing Section Efficiency through Utilization of Worker Capacity by Time Study Technique. International Journal of Textile Science. Dhaka, Bangladesh
Scarvada, A.J., Tatiana, B.C., Susan, M.G., dan Julie, M.H., dan Arthur, V.H. (2004). A Review of the Causal Mapping Practice and Research Literature. Second World Conference on POM and 15th Annual POM Conference. (Mexico, Cancun, 30 April – 3 Mei 2004).
Sritarathorn, K., Phung-on, I., Mounjun, P., Warinsiriruk, E. (2010). Improvement of Efficiency in Biodegradable Packaging Process. The 2nd RMUTP International Conference, 278-282
Sritomo Wignjosoebroto. (1995). Ergonomi Studi Gerak dan Waktu Teknik Analisis untuk Peningkatan Produktivitas Kerja. Jakarta : Guna Widya.
Tague, N. R. (2005). The quality toolbox. (2th ed.). Milwaukee, Wisconsin: ASQ Quality Press. Retrieved from http://asq.org/quality-press/display-item/index.html?item=H1224.
Wajanawichakon, K., Srimitte, Chet. (2012). ECRS’s Principle for a Dringking Water Production Plant. IOSR Journal of Enginnering, 2(5), 956-960.
Copyright (c) 2022 Journal of Technology and Operations Management
This work is licensed under a Creative Commons Attribution 4.0 International License.
The Journal of Technology and Operation Management (JTOM) has taken all reasonable measures to ensure that material contained in this website is the original work of the author(s). However, the Journal gives no warranty and accepts no responsibility for the accuracy or the completeness of the material; no reliance should be made by any user on the material. The user should check with the authors for confirmation. Articles published in the Journal of Technology and Operation Management (JTOM) do not represent the views held by the editors and members of the editorial board. Authors are responsible for all aspects of their articles except the editorial screen design.