LEAN MANUFACTURING IMPLEMENTATION: DEVELOPING A QUALITATIVE RESEARCH DESIGN
DOI:
https://doi.org/10.32890/jtom2014.9.2.1Keywords:
Case study, research design, lean manufacturingAbstract
Lean manufacturing have been widely used by manufacturing companies worldwide. However, low rate of success towards lean manufacturing transformation in many countries had created a cause of concern. Change agent system is a crucial element in lean transition as most of the employees are not familiar with lean work environment, and requires a behavioural and mindset change due to the different expectation for performance and value. This study attempts to investigate the role of change agent in the successful implementation of lean manufacturing. Qualitative case study approach is chosen as it offers a more holistic perspective. Therefore, the aim of this paper is to discuss on developing the research design in answering the research questions. A manufacturing company was selected. The four different methods for gathering data: interviews, observation, documents and focus group will contribute towards the categorization and code development process. This enabled a precise analytic approach to the study, which is an induction of highly specified and valid constructs concerning the knowledge development and conveyance process.
Metrics
References
Angelis, J., & Fernandes, B. (2007). Lean practices for product and process improvement: involvement and knowledge capture. Advances in Production Management Systems, 246, 347-354.
Bamber, L., & Dale, B. G. (2000). Lean production: a study of application in a traditional manufacturing environment. Production Planning & Control, 11(3), 291-298.
Emiliani, M. L. (2006). Origins of lean management in America: The role of Connecticut businesses. Journal of Management HIstory, 12(2), 167-184.
Farris, J. A., Aken, E. M. V., Doolen, T. L., & Worley, J. (2009). Critical success factors for human resources outcomes in Kaizen event: An empirical study. International Journal of Production Economics, 117(1), 42-65.
Herron, C., & Braiden, P. M. (2007). Defining the foundation of lean manufacturing in the context of its origins (Japan). Paper presented at the IET International Conference on Agile Manufacturing, Durham.
Herron, C., & Hicks, C. (2007). The transfer of selected lean manufacturing techniques from Japanese automotive manufacturing into general manufacturing (UK) through change agents. Robotics and Computer-Integrated Manufacturing, 24(4), 524-531.
Hines, P., Holweg, M., & Rich, N. (2004). Learning to evolve: A review of contemporary lean thinking. International Journal of Operation & Production Management, 24(10), 994-1011.
James, T. (2006). Wholeness as well leanness. IET Manufacturing Engineer, 14-17.
Jorgensen, F., Matthiesen, R., Nielsen, J., & Johansen, J. (2007). Lean maturity, lean sustainability. IFIP International Federation for Information Precessing, 246, 371-378.
Liker, J. K. (2004). The Toyota Way: 14 management principles from the world's greatest manufacturer. New York: McGraw-Hill.
Liker, J. K., & Meier, D. (2005). The Toyota Way Fieldbook. New York: McGraw-Hill.
Narang, R. V. (2008). Some issues to consider in lean production. 2008 First International Conference on Emerging Trends in Engineering and Technology, 749-753.
Oliver, N., Delbridge, R., & Lowe, J. (1998). Japanization on the shopfloor. Employee Relations, 20(3), 248-260.
Osono, E., Shimizu, N., Takeuchi, H., & Dorton, J. K. (2008). Extreme Toyota: Radical contradictions that drive success at the world's best manufacturer (Vol. 30). Singapore: Soundview Executive Resources.
Pavnaskar, S. J., Gershenson, J. K., & Jambekar, A. B. (2003). Classification scheme for lean manufacturing tools. International Journal of Production Research, 41(13), 3075-3090.
Real, R., Pralus, M., Pillet, M., & Guizzi, L. (2007, 2007). A study of supporting programs for small and medium enterprises: a first stage going to "lean". Paper presented at the IEEE International Conference on Industrial Engineering and Engineering Management, Singapore.
Shah, R., & Ward, P. T. (2007). Defining and developing measures of lean production. Journal of Operations Management, 25, 785-805.
Smeds, R. (1994). Managing change towards lean enterprises. International Journal of Operation & Production Management, 14(3), 66-82.
Stewart, D. (2001). Change management in lean implementation. In J. Allen, C. Robinson & D. Stewart (Eds.), Lean Manufacturing: A plant floor guide (pp. 157-172). Michigan: Society of Manufacturing Engineers.
Stewart, P. (1998). Out of chaos comes order: from Japanization to lean production. Employee Relations, 20(3), 213-223.
Downloads
Published
How to Cite
Issue
Section
License
Disclaimer
The Journal of Technology and Operation Management (JTOM) has taken all reasonable measures to ensure that material contained in this website is the original work of the author(s). However, the Journal gives no warranty and accepts no responsibility for the accuracy or the completeness of the material; no reliance should be made by any user on the material. The user should check with the authors for confirmation. Articles published in the Journal of Technology and Operation Management (JTOM) do not represent the views held by the editors and members of the editorial board. Authors are responsible for all aspects of their articles except the editorial screen design.